JTAG HS3 Programmer JTAG / USB Micro-B410-299
Toote tehnilised andmed
Valige omadused ja klõpsake otsingunupul, et leida teisi teie andmetele vastavaid tooteid
Allalaadimised
Andmelehed
Tooteteave
Teave perekonna kohta
- Small, complete, all-in-one JTAG programming/debugging solution for Xilinx FPGAs
- Compatible with all Xilinx Tools
Legaliseerimine ja nõuetele vastavus
RoHS
REACH-määrus SVHC puudub
Artikli teave
The HS3 builds on the successful JTAG-HS1 by adding an open-drain buffer to pin 14 allowing for the debugging of Xilinx Zynq-SOC processors. When connected to a PC via a standard A to micro-USB cable, the JTAG HS3 receives its power from USB and can be recognized as a Digilent programming cable, even if the HS3 is not attached to the target board. The JTAG bus can be shared with other devices as the HS3's signals are held in high-impedance, except when actively driven during programming. The HS3 is small and light, allowing it to be held firmly in place by the system board connector.
Eelmine tootenumber
30044265
Paberkataloog
2016/17 Lehekülg 79
Lisainformatsioon
Päritoluriik Taiwan (TW)
Tootja Digilent
Kogukaal (sh. pakend) 45 Gramm
Mõõdud (koos pakendiga) 140 x 75 x 27 MM
Tolli number 8473302000
UNSPSC (v5.03) 32101628